3pcs 220V XH-W3002 Micro Digital Thermostat High Precision Temperature Control Switch Heating and Cooling Accuracy 0.1
106
Direct purchase from the factory 
Zabezpečená platba
Dárek zdarma
Dopravní podmínky
Reklamační podmínkyDárek Zdarma
Vítejte v Roymall, vaší profesionální obchodní stránce pro prémiové dárky. Velmi si vážíme vaší podpory a jako poděkování nabízíme dárek zdarma s každým nákupem. Připraveni prozkoumat naši sbírku? Prohlédněte si náš výběr, uskutečněte objednávku a těšte se na dárek zdarma s vaším nákupem.Dopravní Podmínky
Objednávky zpracováváme do 2 dnů. Objednávky vložené o víkendu nebo svátcích budou zpracovány následující pracovní den.Standardní doba dodání je 5-7 pracovních dnů.Doba dodání se může lišit v závislosti na destinaci.1. Reklamační Podmínky
Přijímáme pouze vrácení zboží zakoupeného přímo z roymall.com. Dárky zdarma nelze vrátit. Vrácené zboží musí být nepoužité a v původním obalu.Vrácení zpracujeme do 3-5 pracovních dnů po obdržení.Personalizované předměty nelze vrátit.Kontaktujte nás: service@roymall.com nebo Whatsapp: +86193598494712.Podmínky Vrácení Peněz
Obdržíte plnou náhradu po obdržení a kontrole vráceného zboží. Náklady na dopravu nejsou vratné.Kontaktujte nás: service@roymall.com nebo Whatsapp: +8619359849471
Feature:
Product Name: Microcomputer Temperature Controller
Product Name: Microcomputer Temperature Controller
Product model: XH-W3002
Temperature range: -50~110°C
Temperature control range: -50~110°C
Temperature measurement accuracy: +-0.2 °C
Temperature control accuracy: +-0.1 °C
Temperature probe: NTC10K (B3950) 1 meter waterproof probe
Supply voltage: DC12V/DC24V/AC220V
Output power: AC220V: 1500W
Output type: direct output
Appearance size: 60 x 45 x 31mm
Opening size: 73mm (aperture 4mm)
Package includes:
3 x Microcomputer Temperature Controller
Wiring:
Package includes:
3 x Microcomputer Temperature Controller
Wiring:
Products related to this item
Loading related products...
❮
❯
Videos for similar product
Loading product videos...
❮
❯
Electronics Ranking
nt
nt
nt
nt
nt
nt
nttKey Description:
ntntt
ntnttUp key: Short press to display the starting temperature, long press to set the starting temperature.
ntnttDown button: short press to display the stop temperature, long press to set the stop temperature.
ntnttShutdown button: Press to turn off the thermostat, and then press to turn on the thermostat.
ntt
nttnttt
ntt
ntt
ntt
nntt
ntt
| nttttttCode | ntttttnttttttCode description | ntttttnttttttSetting range | ntttttnttttttFactory setting | ntttt
| nttttttP0 | ntttttnttttttStarting temperature | ntttttntttttt -50~110°C | ntttttntttttt25 | ntttt
| nttttttP1 | ntttttnttttttStop temperature | ntttttntttttt -50~110°C | ntttttntttttt40 | ntttt
| nttttttP2 | ntttttnttttttTemperature correction | ntttttntttttt -10~10°C | ntttttntttttt0°C | ntttt
| nttttttP3 | ntttttnttttttDelayed start | ntttttntttttt0-10 minutes | ntttttntttttt0 | ntttt
ntt
ntttP0. Set the startup temperature:
nttnttt
nttntttPress the Setup button to enter the internal menu. The default display is P0. Press the Setup button again and set the desired startup temperature by pressing the up and down buttons.
nttnttt
nttntttP1. Set the stop temperature:
nttnttt
nttntttPress the setup button to enter the internal menu, the display is P0, switch to P1 by the up and down keys, press the setup button again, and set the required stop temperature by the up and down buttons.
nttnttt
nttntttP2. Set the temperature correction:
nttnttt
nttntttIn the same way, enter the internal menu, switch to P2 by pressing the up and down buttons, press the setting button again, and set the required calibration temperature by pressing the up and down buttons. (Note: In the setting, if the detected temperature value is 0.5 °C larger than the actual temperature value, then the calibration temperature to be set is -0.5 ° C. If the detected value is 1 ° C smaller than the actual temperature value, the set calibration temperature is required. It is 1 ° C. Detection temperature + correction temperature = actual temperature.)
nttnttt
nttntttP3. Set the delay start:
nttnttt
nttntttIn the same way, enter the internal menu, switch to P3 by pressing the up and down buttons, press the setting button again, and set the required delay time by the up and down buttons, the unit is minute. (Note: Delay start is generally used for compressor refrigeration. If it is used in refrigerator freezer, this value needs to be set. According to compressor back pressure, the general setting is 3-6 minutes, if you are not using it for control or doesn't need delay function, skip directly.
nttntt
ntttInstructions:
nttnttt
nttntttStart temperature
nttntttStart temperature > stop temperature = cooling mode (output is connected to the cooling unit)
nttnttt
nttnttt1. Connect the power supply and heating or cooling equipment according to the wiring diagram above (note the positive and negative poles)
nttnttt2. Press and hold the up key to set the starting temperature. When the screen number flashes, press the up and down keys to set the starting temperature you want. After setting, wait for 5 seconds to brake the system.
nttnttt3. Press and hold the key to set the stop temperature. When the screen number flashes, press the up and down keys to set the desired stop temperature. After setting, wait for 5 seconds to automatically save the data.
nttnttt4. Restore the factory: Colleagues press and hold the up and down keys for 5 seconds, when the screen displays 888, the factory is restored.
nttnttt5. Press the power off button to turn off the thermostat and press to turn on the thermostat.
ntnTips:
n
n
nt888: In the case of power-on, press and hold the up and down keys for about 3 seconds, the digital tube displays 888, and automatically jumps to the detection temperature, that is, the factory settings are restored successfully.
nntLLL: Describe the sensor is open circuit, repair the sensor, or replace the sensor
nntHHH: The sensor is short circuit.
nt
nt
nnt
nt
n
n
n
n
n
n
n
n
n
n
