25.5x25.5mm DarwinFPV F411 Flight Controller with 5V BEC 45A 3-6S ESC ELRS 2.4G Receiver AIO Compatible with CineApe35 FPV Racing Drone
Zabezpečená platba

Dárek Zdarma
Vítejte v Roymall, vaší profesionální obchodní stránce pro prémiové dárky. Velmi si vážíme vaší podpory a jako poděkování nabízíme dárek zdarma s každým nákupem. Připraveni prozkoumat naši sbírku? Prohlédněte si náš výběr, uskutečněte objednávku a těšte se na dárek zdarma s vaším nákupem.Dopravní Podmínky
Objednávky zpracováváme do 2 dnů. Objednávky vložené o víkendu nebo svátcích budou zpracovány následující pracovní den.Standardní doba dodání je 5-7 pracovních dnů.Doba dodání se může lišit v závislosti na destinaci.1. Reklamační Podmínky
Přijímáme pouze vrácení zboží zakoupeného přímo z roymall.com. Dárky zdarma nelze vrátit. Vrácené zboží musí být nepoužité a v původním obalu.Vrácení zpracujeme do 3-5 pracovních dnů po obdržení.Personalizované předměty nelze vrátit.Kontaktujte nás: service@roymall.com nebo Whatsapp: +86193598494712.Podmínky Vrácení Peněz
Obdržíte plnou náhradu po obdržení a kontrole vráceného zboží. Náklady na dopravu nejsou vratné.Kontaktujte nás: service@roymall.com nebo Whatsapp: +8619359849471This 25.5x25.5mm DarwinFPV F411 45A ELRS AIO includes flight controller, ESC and receiver.
mso-bidi-font-family:"Times New Roman";font-size:11.0000pt;mso-font-kerning:1.0000pt;">
Description:
This is a unique AIO that meets the needs of today"s industry. It has a 25.5x25.5 mounting hole pitch, but it does not rotate 45u00b0! The advantage of this is a more compact and safer installation layout. Unlike traditional AIO, the electronic components on both sides are exposed outside the frame. It is more like a stack, but only one layer. You can install DJI O3, VISTA, HDZERO, Avatar and other digital VTX on it, which is very convenient.
All interfaces are of direct plug-in design, and installation can be completed without soldering any wires, making it suitable for novice players who cannot solder. The USB interface is also designed to face upward, which solves the industry problem of difficulty in adjusting whoop frame parameters.
The ESC and FC are designed separately to separate high-power and small-signal components to reduce interference and reduce the failure rate. Even if they are damaged, there is no need to replace them all together, which reduces maintenance costs. In addition, it also integrates an ELRS 2.4G receiver, which is especially suitable for users who are sensitive to cost and space.
Of course, we have also carried out the same glue protection treatment on the circuit board as always. Through feedback from tens of thousands of users in the past, this protection measure can indeed significantly reduce the risk of accidental damage due to impact, rain, etc.
Feature:
1. 25.5u00d725.5 mounting hole position, the entire AIO can be placed in the frame, and the protection is better;
2. It is more convenient to install DJI O3, VISTA, HDZERO, Avatar and other digital VTX;
3. Integrated ELRS 2.4G receiver, suitable for players who are more sensitive to cost and compactness;
4. ESC and FC isolation design reduces failure rate. Even if it is damaged, there is no need to replace everything together, reducing maintenance costs;
5. All interfaces are plug-in designs, suitable for novice players who cannot weld;
6. The USB interface has a straight-out design at the top, making it easier to adjust parameters of the whoop frame;
7. Glue-filled protective treatment greatly reduces the risk of accidental damage due to impact, rain, etc.
Specification:
Brand: DarwinFPV
Model: F411 45A ELRS AIO
Name: | Specification: |
F411 45A ELRS AlO | Input Voltage: 3-6S Lipo |
Mounting Dimensions: 25.5u00d725.5mm | |
Dimensions: 58.5u00d738u00d713mm | |
Weight: 16.4g | |
Package Dimensions: 79u00d755u00d730mm | |
Package Weight: 49.5u00b12g | |
DarwinFPV F411 45A ELRS AlO - FC Board | Main Control Chip: STM32F411 |
Gyro: MPU6500 | |
OSD: AT7456E | |
Receiver: SPI ELRS 2.4G | |
Input Voltage: 3-6S Lipo | |
BEC: 5V/0.5A u00d7 3 (Built-in overcurrent protection function) | |
USB Interface: 1x USB Type-C | |
Serial Port: UART1, UART2 | |
Soft Serial Port: S5 | |
Firmware : DARWINF4SX1280HD (BetaFlight) | |
Dimensions: 38u00d723u00d78.5mm | |
Weight : 3.9g | |
DarwinFPV F411 45A ELRS AlO - ESC Board | Main Control Chip: EFM8BB21 (8 bit 48MHz) |
Input Voltage: 3-6S Lipo | |
Continuous Current: 4x45A | |
Peak Current: 4u00d755A (5S) | |
Support Throttle Protocol: Dshot 300/600 | |
Galvanometer: Support (Current Meter Scale=125) | |
Firmware: J_H_40 (BlueJay) | |
Power Cable: #16AWG/120mm | |
Mounting Dimensions: 25.5u00d725.5mm | |
Dimensions: 38u00d738/x4mm | |
Weight: 6.6g |
Package Included:
1 x DarwinFPV F411 45A ELRS AIO
1 x 120mm power wireuff08#16AWG red/blackuff09
1 x Analog camera wireuff083Puff09
1 x Analog VTX wireuff084Puff09
1 x GPS wireuff084Puff09
1 x HD VTX wireuff084Puff09
2 x SH1.0 plastic shelluff083Puff09
3 x SH1.0 plastic shelluff084Puff09
1 x Spare screws
5 x M2*6.6 Shock absorbing ball(yellow)
1 xType-C dust plug
1 x Stickers
mso-bidi-font-family:"Times New Roman";font-size:11.0000pt;mso-font-kerning:1.0000pt;">
mso-bidi-font-family:"Times New Roman";font-size:11.0000pt;mso-font-kerning:1.0000pt;">